livechat

Call Us Today: (800) 211-6244

Janitorial Products

Can Liners 101

The Two Types of Plastic

1) Linear Low Density Bags (LLD)

Used for rough or sharp objects under tough transport conditions. These bags are very strong and are more resistant to tearing, but handle lower load capacities than Hi–D bags.

Suggested LLD applications:

  • Sticks, rough yard trimmings, glass.
  • Metal w/sharp edges.
  • Plastic eating utensils, food with rough edges.

2) Hi Density Bags (Hi-D)

Used for paper and non-rough objects under moderate transport conditions. These bags are very strong and handle higher load capacities than LLD bags, but tear easier once punctured.

Suggested Hi-D applications:

  • Paper–plates, cups, towels, office.
  • Grass, rags, smooth heavy objects.
  • Cans w/out sharp edges, food without sharp edges.


Gauge (film thickness)

LLD Gauge Equivalents and Recommendations

Small Cans  
Light .30-.49 Mil
Medium .50-.60 Mil
Midsize Cans  
Heavy .61-.74 Mil
Extra Heavy .75-.80 Mil
Super Heavy .81-1.0 Mil
Larger Cans  
Super Heavy 1.1-1.3 Mil
XX Heavy 1.4-1.9 Mil
XXX Heavy 2.0-3.0 Mil

Hi-D Gauge Equivalents and Recommendations

Small Cans  
Light 6-9 Mic
Midsize Cans  
Medium 10-12Mic
Heavy 13-14 Mic
Larger Cans  
Extra Heavy 15-17 Mic


Bottom Seals

Almost all our liners are manufactured with Star Seals because they provide the strongest seal. A Star Seal is not possible with the thickest-gauge material, so a Flat Seal is used to create the strongest possible seal for these heavy-weight bags.

High Performance Star Seal

star seal

  • Most common type of seal
  • Designed without gussets
  • Eliminates gaps where leaks can occur
  • Conforms to the shape of the container
  • Distributes weight evenly
  • Maximizes carrying capacity
  • Sized in two dimensions, EX: 40 x 46

Additional Seals

Flat Seal

flat seal

  • Two-dimensional bag (much like a pillow case)
  • Strong, but has the potential to leak wet trash from the corners
  • Do not conform as well to the shape of can
  • Sized in two dimensions, EX: 40 x 46
Gusset Seal

gusset seal

  • Rarely used in the industry
  • Flat-style bag design
  • Both sides tucked in to form gussets
  • Sealed through four layers of film (the middle of the bag has only two sealed layers)
  • A potentially weak bottom seal
  • Sized in three dimensions, EX: 23 x 17 x 46

Formulas

Linear Low Density Case Weight Formula - Length x Width x Gauge (in mils) ÷ 15 ÷ 1000 x bags per case = net lbs. per case (approximate)

High Density Case Weight Formula - Length x Width x Gauge (in microns) ÷ 14.5 ÷ 25.4 ÷ 1000 x bags per case = net lbs. per case (approximate)

Microns to Mils Formula - Divide the microns by 25.4 to arrive at mil thickness.
Example:
10 Microns ÷ 25.4 = .39 Mil
24 Microns ÷ 25.4 = .94 Mil

Mils to Microns Formula - Multiply the mils by 25.4 to arrive at mic thickness. (1 Mil = 25.4 Microns)
Example:
.30 Mil x 25.4 = 7.6 Microns
.65 Mil x 25.4 = 16.5 Microns

Microns to Mils - Converted Microns to Mils

Microns to Mils - Converted Microns to Mils


Term Definitions

Can Liner Term used for garbage, trash or waste bags. Used in industrial, institutional and medical applications

Colors Can liners come in standard colors: clear, black, white, gray, red, blue and yellow. (Other colors available.)

Food and Utility Bags Small clear bags designed to hold a variety of small objects (e.g., bread, poultry, vegetables, etc.)

Film Strength Refers to the physical strength of the can liner. Some resins have a higher film strength than others. Our can liners are made from highest quality resins, giving them the highest quality film in the market place.

Dart Drop Test ASTM test used to determine the resistance of a bag to local failure or puncturing of the film.

Elmendorf Tear Test ASTM test used to measure the resistance to tearing.

Wet Load Capacity Measurement of how much wet weight a can liner will hold.

Dry Load Capacity Measurement of how much dry weight a can liner will hold.

Gauge Term used to describe thickness. LDPE and LLDPE can liners are measured by mil thickness and HMW-HDPE can liners are measured by micron thickness.

Mil (One thousandths of an inch) Term used in the measurement of LDPE and LLDPE can liners. One mil is .001". Can liners range between .35 to 4.0 mil.

Micron Term used in the measurement of HMW- can liners. 25.4 microns equals .001". 1,000 microns (M) = 1mm. HMW-HDPE can liners are 6 to 24 microns.

Resin Short term for Polyethylene resin. The three types of PE resin are LDPE, LLDPE and HMW-HDPE (see below). Other plastic resins include vinyl, polypropylene, styrene and nylon.

LDPE (Low Density Polyethylene) This resin was used with older can liner technology. Resin has good clarity but weak film strength. Today it is used primarily for Food and Utility Bags that don’t require heavy loads.

LLDPE (Linear Low Density Polyethylene) This is the primary type of resin used in modern can liner manufacturing technology. Bags made from LLDPE film provide excellent combination of film strength, puncture resistance and tear resistance.

HMW-HDPE (High Molecular Weight–High Density Polyethylene) Bags made from HMW-HDPE resin provide excellent film strength and puncture resistance, but less tear resistance than LLDPE.

HAO (Higher Alpha Olefin resin) A high-grade hexene-or- octene-based resin used in all our LLD liners. The properties of this resin allow for a higher-quality can liner.

Butene One of three types of LLDPE resin. Butene has weaker film-strength properties than hexene or octene.

Hexene One of three types of LLDPE resin. We use Higher Alpha Olefin (High Grade Hexene) in the manufacturing of can liners. Properties include high film strength and increased tear resistance.

Octene One of three types of LLDPE resin. We use Higher Alpha Olefin (High Grade Octene) in the manufacturing of can liners. Used in other applications because of its excellent physical properties.

Prime Resin Refers to the usage of high-quality, “fresh from the reactor,” resin. We use only prime resins in all of the products we produce, unless specified otherwise.

Blended Resin Refers to the combination of two or more types of resin.

Regrind Resin (Repro) Refers to resin that has been used at least once before. Can be post-industrial (scrap) or post-consumer (recycling). Strength properties of resin is decreased each time it is reused.

Seal Term used to describe bottom of a can liner. The three types of seals are flat, gusseted and star. (See Bottom Seal section.)

Flat Seal Straight seal along bottom of a can liner (looks like a pillow case). Though Flat Seals are strong, they may have a tendency to leak wet trash from the corners.

Gusset Seals A flat-style bag manufactured with both sides tucked in to form gussets. Has a tendency to leak wet trash from the center at gusset points where four layers of film meet two.

Star Seal Designed without gussets, the Star Seal eliminates gaps along the seal where leaks can occur. The bottom of the bag is folded over several times and sealed. Trash rests on the material instead of the seals. This leak-resistant seal holds wet trash better than the other two types of seals.

Individually Folded Can liners are separately folded, then stacked on top of one another. This allows the end-user to pull liners out of the box with much more ease vs. bulk-folded bags.

Cored Rolls Can liners are rolled together on cardboard cylinders (looks similar to a roll of paper towels). Can liners come inside a special box that dispenses with ease.

Coreless Rolls Can liners are rolled in groups of 25 or 50 per roll. There are 4 to 10 rolls per case. Rolls are perforated or interleaved.

For more information, view the Inteplast Can Liner Guide PDF

Join Our Newsletter and Stay Connected With Us

Our Locations

For more than 60 years customers have relied on our expertise to help them effectively and economically manage their cleaning and maintenance needs.

We currently have 3 locations serving customers throughout Michigan and Northwest Ohio. Each location includes a showroom, warehouse and experienced representatives ready to assist you with any questions you may have concerning the right janitorial supplies that you may need to make your place shine.

Additionally we are partnered with prominent distributors across North America so we are able to go wherever you do and provide you with consistent reliable service.

Allied US Locations

Bought iron generic abilify usa kindness crawled buy fluoxetine 40 mg pending damp buy real cialis online canada laid leader celebrex online kaufen obviously swam ciprodex discount coupon phosphate seedling